KHAOS 3-Way HEPA Filter

• Multi-layer filter w/catalyst:  HEPA MERV16 + Carbon + Pre-filter @ *CADR 300 m³/hr
• Replaceable 3-way filter to capture particulates
  • Pre-Filter captures large particles such as dust, hair, lint, pet fur
  • Activated Carbon odor filtration reduces household odors and VOCs (volatile organic compounds)/gases such as smoke, pollution odors, cooking fumes, pet odors
  • HEPA-Grade MERV 16 filter removes airborne particles such as allergens, pollen, dust, germs, pet dander, odor, mold spores, and smoke from air that passes through the filter;  HEPA (high-efficiency particulate air) is a type of air filter consisting of an interwoven matrix of densely packed fibers that create a very small pathway for air to travel through.  This net of fibers captures microscopic particulates and filters them out of the air you breathe which ultimately helps improve indoor air quality.
• Indicator signals filter change (vacuum quarterly, replace annually)
  • The filter icon on the top control panel lights up when the cumulative working time of 2000h are detected

Generally, you can clean your replaceable HEPA filter once every three to four months, and replace it annually.  It is important to clean/replace the HEPA filter periodically, to keep the KHAOS™ unit in working condition.

• Clean the HEPA pre-filter about once every three to four months of constant use by using the brush attachment of your vacuum cleaner to gently remove dust and debris.
• Replace the HEPA filter every 2000 hours or about every 12 months of constant use.  When the cumulative working time of 2000h are detected by the KHAOS™ the filter icon on the control panel lights up, indicating your filter needs to be changed/replaced.
• RESET: After cleaning or replacing with a new filter, press and hold the filter button on the control panel for 5 seconds to reset

** NEVER use water or any household cleaners or detergents to clean the HEPA filter.  Liquids like water and soap will break down the soft fibers inside the filter media and ruin it.

** We also do not recommend using compressed air to clean filters under any circumstances. To ensure no damage is done to the filter media, the pressure of the compressed air would have to be so low it would be ineffective at cleaning.